ASTM A860 WPHY 60 Tee Carbon Steel Pipe Fittings B16.9 Oil Gas Piping
Overwiew
ASTM A860 WPHY 60 fittings are seamless or welded carbon steel forgings with high yield strength.WPHY 60 indicates ASTM A860 WPHY 60 fittings with a minimum yield strength of 60ksi.The composition has carbon, manganese, silicon, sulfur, chromium, nickel and vanadium, niobium, titanium and aluminum. These elements make up only a small percentage, less than 3 in most grades, but make a big difference in physical and mechanical properties.WPHY 60 elbows are one of the very common fittings used in pipeline applications.
Elbows help to change the direction of the pipe line without putting pressure on the pipe wall. There are other types of fittings in these grades, such as tees, elbows and reducers. sizes of fittings made of ASTM A860 Gr WPHY 60 material may vary. There are 1/2 inch to 48 inch nominal diameters with different wall thicknesses that make up schedules sch10 through XXS. These different sizes vary according to ASME B16.9 and B16.28 standards.
Chemical Composition of ASTM A860 WPHY60 Tee
| | C | Mn | P | S | Si | Ni | Cr | Mo | Cu | Ti | V | Cb | Al |
| A860 | 0.20 | 1.00-1.45 | 0.03 | 0.01 | 0.15-0.40 | 0.50 | 0.30 | 0.25 | 0.35 | 0.05 | 0.10 | 0.04 | 0.06 |
Mechanical Properties of ASTM A860 WPHY60 Tee
| Mechanical Properties | Tensile (MPa) | Yield (MPa) | Elongation % 2in |
| WPHY60 | 515-690 | 415 | 28 |
What is ASTM A860 WPHY60 Tee?
ASTM A860 WPHY 60 fittings are seamless or welded carbon steel forgings with high yield strength.WPHY 60 indicates ASTM A860 WPHY 60 fittings with a minimum yield strength of 60ksi.The composition has carbon, manganese, silicon, sulfur, chromium, nickel and vanadium, niobium, titanium and aluminum. These elements make up only a small percentage, less than 3 in most grades, but make a big difference in physical and mechanical properties.WPHY 60 elbows are one of the very common fittings used in pipeline applications.
Elbows help to change the direction of the pipe line without putting pressure on the pipe wall. There are other types of fittings in these grades, such as tees, elbows and reducers. sizes of fittings made of ASTM A860 Gr WPHY 60 material may vary. There are 1/2 inch to 48 inch nominal diameters with different wall thicknesses that make up schedules sch10 through XXS. These different sizes vary according to ASME B16.9 and B16.28 standards.
Application
Oil Gas
pressure piping
pressure vessel fabrication
Product Tags:
|
|
ASTM A860 WPHY 60 Tee Carbon Steel Pipe Fittings B16.9 Oil Gas Piping Images
|
